4D Shadow Pyramid Number Plates

£49.99 – £83.99

Style: 4D Matt Shadow number plates are made using laser cut acrylic with a curved edge.
Surface: 4D letters stuck using 3M adhesive
Size: 520mm x 110mm (standard size)
Documentation: We require documents to prove ownership of registration number and buyers identification (to be upload during checkout)
Legality and Spacing: Registration number will be printed in Charles Wright font and spaced as DVLA document
Delivery: Royal Mail Tracked

Style

Placement

Add Black Border

*Vehicle Registration Number
Notes
*Style

*Placement

*Add Black Border

Reset options

SKU: b 4DSHDWPYRFR Categories: 4D, Plate Size, Plate Style, Standard

QUALITY: Made in UK using the highest quality reflective and acrylic.
DURABLITY: Made with high quality material. Will withstand all British weather types.
FITTING: Number plates are not provided pre-drilled. Options on heavy duty durable sticky pads or crews and caps. Additional plate holders available in the Fitting tab.
PACKAGING: We securely wrap all number plates in padded envelopes. Letterboxes can accommodate the standard-sized number plates by slotting them through.
DVLA REGISTERED: Made in the UK by Official Plates Ltd who are a Registered Number Plate Supplier with DVLA. The supplier details and the British Standard BSAU145e mark will receive printing along the bottom.
LEGALITY & SPACING: 2 Documents required:
- 1. You need to provide one form of personal identification. A Driver’s License, Passport, Utility Bill, Council Tax or rates bill from the last 6 months, or a bank/building society statement can be provided.
- 2. One proof of entitlement to the registration number is required (Any one of – Log Book V5C, New Keeper green slip, Certificate of Entitlement V750, Tax Reminder V11, Retention Certificate V778, Temporary number plate authorisation certificate eV948).
- Spacing of registration number will be as per DVLA specifications, ensuring road legality.
- To comply with the latest British Standard BSAU145e for driving on public roads and for MOT purposes, all plates will come with legal details along bottom to confirm components.

All our products come with a 12 month warranty which covers against the following:

Delamination of acrylic and reflective
Digits falling off

Warranty does NOT cover:

Number plates falling off or being stolen
Drilling through 3D / 4D characters and damaging them
Damaged plate as a result of drilling or over screwing

Damaged item upon receipt

If your item has been damaged during transit, please take photo’s of damage, packing and shipping label and send to us. We will work with you to get replacement sent out.

Weight	730 g
Dimensions	55 × 17 × 2 cm
Style	4D 3mm + 4D Pyramid Centre, 4D 3mm + Matt 4D Pyramid Centre, 4D 5mm + 4D Pyramid Centre, 4D 5mm + Matt 4D Pyramid Centre, Matt 4D 3mm + 4D Pyramid Centre, Matt 4D 3mm + Matt 4D Pyramid Centre, Matt 4D 5mm + 4D Pyramid Centre, Matt 4D 5mm + Matt 4D Pyramid Centre
Placement	Front and Rear
Add Black Border	No, Yes

Sticky Pads

Surface must be flat, 100% clean and dirt free.

Before removing old plates, clean the vehicle around the plate
Apply masking tape around the plate to mark the position of where the new plate is to be positioned
Remove old plates and clean the surface thoroughly, ensure there is no dirt or grease left behind
Affix sticky pads equidistantly on the back of the plate and guide the plate to where it is to be fitted (using the masking tape as a guide)
Ensure the plate is in line with the masking tape and push plate onto the vehicle
Run your palm across the plate to ensure all sticky pads have made contact, then use both hands to push the plate onto the car with pressure for around 30 seconds

Tip

Adhesive bonds better and quicker when applied in warmer condition than cold
Wash the car before fitting plates so the car is fully clean when plates are on
Do not use sticky pads if surface is wet or when it is raining

Screws and Caps

Remove old front plate from vehicle
Place new front plate on the ground with the registration number facing down
Place old front plate on top of the new plate, ensuring both registration numbers are facing the ground
Insert a pen through the screw holes on old plate to mark the screw positions on the new plate
Gently drill the new plate in the marked position with a small drill bit first, then a larger one
Insert the screw through the screw cap and screw plate to vehicle. Do not overtighten, gentle finger tight will suffice. Close the screw cap
Repeat for the Rear plate

Tips

Do not drill through the front of the plate, this can potentially push the backing off the plate
Screw holes for the front plate may not match the holes on rear plate, ensure you mark screw positions with corresponding plate

We use Royal Mail for our shipping solution. After your item is despatched, you will receive an email with the tracking number.

As number plate registration numbers are unique, we cannot take them as a return as it cannot be sold to someone else. If you have made an error or changed your mind, you will need to order again.

If we make a mistake or item is damaged in transit, please message us with pictures and we will work to get replacement set sent to you.

Reviews

There are no reviews yet.

4D Shadow Pyramid Number Plates

*Style

*Placement