No products in the basket.
4D Gel Number Plates
£44.99 – £62.99
- Style: 4D Gel number plates are made using a base 4D layer + 3d Gel top. Giving it depth with a glossy effect.
- Surface: 4D letters Stuck using 3M adhesive
- Size: 520mm x 110mm (standard size). Plates will NOT come pre-drilled
- Documents: We require document to prove ownership of registration number and buyers identification (upload during checkout)
- Legality and Spacing: Registration number will be printed in Charles Wright font and spaced as DVLA document
- Delivery: Royal Mail Tracked
- QUALITY: Made in UK using the highest quality reflective and acrylic.
- DURABLITY: Made with high quality material. Will withstand all British weather types.
- FITTING: Number plates are not provided pre-drilled. Options on heavy duty durable sticky pads or crews and caps. Additional plate holders available in the Fitting tab.
- PACKAGING: We securely wrap all number plates in padded envelopes. Letterboxes can accommodate the standard-sized number plates by slotting them through.
- DVLA REGISTERED: Made in the UK by Official Plates Ltd who are a Registered Number Plate Supplier with DVLA. The supplier details and the British Standard BSAU145e mark will receive printing along the bottom.
- LEGALITY & SPACING: 2 Documents required:
- 1. You need to provide one form of personal identification. A Driver’s License, Passport, Utility Bill, Council Tax or rates bill from the last 6 months, or a bank/building society statement can be provided.
- 2. One proof of entitlement to the registration number is required (Any one of – Log Book V5C, New Keeper green slip, Certificate of Entitlement V750, Tax Reminder V11, Retention Certificate V778, Temporary number plate authorisation certificate eV948).
- Spacing of registration number will be as per DVLA specifications, ensuring road legality.
- To comply with the latest British Standard BSAU145e for driving on public roads and for MOT purposes, all plates will come with legal details along bottom to confirm components.
All our products come with a 12 month warranty which covers against the following:
- Delamination of acrylic and reflective
- Digits falling off
Warranty does NOT cover:
- Number plates falling off or being stolen
- Drilling through 3D / 4D characters and damaging them
- Damaged plate as a result of drilling or over screwing
Damaged item upon receipt
- If your item has been damaged during transit, please take photo’s of damage, packing and shipping label and send to us. We will work with you to get replacement sent out.
| Weight | 730 g |
|---|---|
| Dimensions | 53 × 13 × 2 cm |
| Style | 4D 3mm + Gel |
| 4D Gel Depth | 4D 3mm + 3D Gel, 4D 5mm + 3D Gel, 4D 6mm (2x 3mm layers) + 3D Gel |
| Placement | Front and Rear |
| Add Black Border | No, Yes |
Sticky Pads
Surface must be flat, 100% clean and dirt free.
- Before removing old plates, clean the vehicle around the plate
- Apply masking tape around the plate to mark the position of where the new plate is to be positioned
- Remove old plates and clean the surface thoroughly, ensure there is no dirt or grease left behind
- Affix sticky pads equidistantly on the back of the plate and guide the plate to where it is to be fitted (using the masking tape as a guide)
- Ensure the plate is in line with the masking tape and push plate onto the vehicle
- Run your palm across the plate to ensure all sticky pads have made contact, then use both hands to push the plate onto the car with pressure for around 30 seconds
Tip
- Adhesive bonds better and quicker when applied in warmer condition than cold
- Wash the car before fitting plates so the car is fully clean when plates are on
- Do not use sticky pads if surface is wet or when it is raining
Screws and Caps
- Remove old front plate from vehicle
- Place new front plate on the ground with the registration number facing down
- Place old front plate on top of the new plate, ensuring both registration numbers are facing the ground
- Insert a pen through the screw holes on old plate to mark the screw positions on the new plate
- Gently drill the new plate in the marked position with a small drill bit first, then a larger one
- Insert the screw through the screw cap and screw plate to vehicle. Do not overtighten, gentle finger tight will suffice. Close the screw cap
- Repeat for the Rear plate
Tips
- Do not drill through the front of the plate, this can potentially push the backing off the plate
- Screw holes for the front plate may not match the holes on rear plate, ensure you mark screw positions with corresponding plate
We use Royal Mail for our shipping solution. After your item is despatched, you will receive an email with the tracking number.
As number plate registration numbers are unique, we cannot take them as a return as it cannot be sold to someone else. If you have made an error or changed your mind, you will need to order again.
If we make a mistake or item is damaged in transit, please message us with pictures and we will work to get replacement set sent to you.
2 reviews for 4D Gel Number Plates
Add a review
Related products
£29.99 – £69.99
£14.99 – £23.99
£14.99 – £26.99
£54.99 – £67.99
£44.99 – £57.99
£29.99 – £64.99
£19.99 – £34.99
Shane Pous (verified owner) –
These 4D 3mm + Gel plates are absolutely AWESOME!!!
After speaking to Moses, who was very helpful we ended up ordering a second pair for my wife’s car. Fast professional service, quick delivery and now two very happy customers – thank you.
Bear this in mind when looking for good quality 4D Gel Plates – the letters and numbers are manufactured by bonding gel characters onto the acrylic characters. We initially searched many websites but were concerned how many had issues where the gel letters do not line up correctly or match the exact shape of the acrylic letters – which creates under or overlapping. Moses assured us that they use gel and acrylic characters that would line up and match perfectly – they are spot on and we are very happy with the results.
They also use the minimum size font allowed (3mm) for the legal markings. The advantage of this is the gap from the bottom edge of the plate to the characters is more or less the same as the gap from the top of the characters to the top edge of the plate – giving a more balanced look.
100% recommend them.
Toni P. (verified owner) –
4D GEL PLATES
Love my new number plates – they look great.
After buying a pricey personalised registration number from DVLA, we wanted a set of good quality number plates to go with it and Bedford Number Plates certainly delivered.
Now we have 2 cars with their plates on and can highly recommend them.
10 out of 10 on a quality product, friendly customer service, very helpful with answering my questions and quick to offer help. On top of that, a quick delivery too.